7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
104 Error Codes
Error Codes
Top Access has the pages for the job lists; print, transmission, reception, and scan jobs. The following error codes are
shown on these pages in the [Logs] tab (successful jobs have no codes). These codes help you specify the cause of an
error you might encounter.
The error codes are also shown on the [LOG] window of the touch panel. See the following lists when you find an error
code on the touch panel.
Error codes on print jobs
Error Code Problem Description Corrective Action
402F
PM size error 1200 dpi print jobs cannot be printed without the optional expansion
memory. Send a print job with a 600 dpi setting.
4031 HDD full error Delete unnecessary private print jobs and invalid department print jobs.
4032 Private-print-only error Jobs other than Private print cannot be printed. Perform Private printing.
4033
Printing data storing limitation error Printing with its data being stored to the HDD temporarily (Proof print,
Private print, Scheduled print, etc.) cannot be performed. Perform normal
printing.
4034
e-Filing storing limitation error Printing with its data being stored to the HDD (print and e-Filing, print to
e-Filing, etc.) cannot be performed. Perform normal printing.
4035
Local file storing limitation error Network Fax or Internet Fax cannot be sent when “Local” is selected for
the destination of the file to save. Select “Remote” (SMB/FTP) for the
destination.
4036
User authentication error The user performing the printing has not been authenticated or user-
registered. Perform user authentication or user registration.
4040
No authority to execute a job The user has not been assigned the authority to perform this operation by
the administrator.
4050
The connection with the LDAP server or its
authority setting has something wrong.
Ask your LDAP server administrator about it.
A221 Job canceled (Job was canceled.)
A222
Power failure Check whether the power cable is connected properly and it is inserted
securely. Check whether the power voltage is unstable.
A290
Limit over error
(Black and White)
Number of prints has exceeded the one specified with the department
code and user code at the same time. Clear the limit counter.
A291
Limit over error
(Black and White)
Number of prints has exceeded the one specified with the user code.
Clear the limit counter.
A292
Limit over error
(Black and White)
Number of prints has exceeded the one specified with the department
code. Clear the limit counter.
A2A0
Limit over error (Color) The number of prints has exceeded the one specified for the department
code and user code, or users (guests) are not authorized to perform color
printing. Clear the limit counter, or authorize users so that they can
perform color printing.
A2A1
Limit over error (Color) The number of prints has exceeded the one specified for the user code,
or users (guests) are not authorized to perform color printing. Clear the
limit counter, or authorize users so that they can perform color printing.
A2A2
Limit over error (Color) Number of prints has exceeded the one specified with the department
code. Clear the limit counter.
To Next Page
Loading...
Need help?
General
