1 TROUBLESHOOTING FOR THE HARDWARE
62 Cleaning the Slit Glass and Main Charger
Cleaning the Slit Glass and Main Charger
Follow the procedure below to clean the slit glass and main charger.
Cleaning the slit glasses
1
Open the front cover.
2
The slit glass cleaner is placed inside the front cover.
Press and release the latch of the holder to take out
the slit glass cleaner.
3
Remove the cap.
y Do not touch the slit glass cleaner pad, because the toner on
the pad may stick to your hands and the cleaner pad may be
stained.
y Use the slit glass cleaner with its pad side facing down.
To Next Page
Loading...
Need help?
General
