EasyManuals Logo

Toshiba e-studio 2330C Troubleshooting Guide

Toshiba e-studio 2330C
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam 13
1 TROUBLESHOOTING FOR THE HARDWARE
If paper jams occur frequently
The following are the common causes of paper jams. If the problem persists, check for the following situations.
y An unsuitable original is placed on the Reversing Automatic Document Feeder.
y Unavailable paper with the equipment is used.
y Paper sizes are not consistent between the size in a drawer or the bypass tray and the one registered in the
equipment.
y All the jammed paper has not been removed.
y There is too little or too much gap between paper and the side guide in the drawer.
y The amount of paper placed in a drawer exceeds the limit indicated on the side guide of the drawer.
Paper jam in the Reversing Automatic Document Feeder (optional)
1
Raise the lever and open the upper cover.
2
Remove the original.
3
Turn the dial to remove the original.
4
Open the transport guide.
1
2

Table of Contents

Other manuals for Toshiba e-studio 2330C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba e-studio 2330C and is the answer not in the manual?

Toshiba e-studio 2330C Specifications

General IconGeneral
BrandToshiba
Modele-studio 2330C
CategoryAll in One Printer
LanguageEnglish

Related product manuals