1 TROUBLESHOOTING FOR THE HARDWARE
20 Clearing a Paper Jam
4
Open the Bridge Unit cover.
When the Finisher (optional) is not installed, skip this step.
5
Rotate the green dial downward to move the paper to
the exit side.
6
Remove the jammed paper from the receiving tray or
the Bridge Unit (optional).
7
Close the Bridge Unit cover (optional).
When the Finisher (optional) is not installed, this step is unnecessary.
If no jammed paper can be found on the exit side, proceed to step 8.
8
Rotate the green dial upward to move the paper down,
and remove the paper.
To Next Page
Loading...
Need help?
General
