Switching Colour Mode 103
Switching Colour Mode
This function allows you to switch colour modes. There are three types of colour modes as fol-
lows:
FULL COLOUR: All originals are copied in full colour regardless of the type of each original.
BLACK: All originals are copied in black regardless of the type of each original. (Default
setting)
AUTO COLOUR:The equipment automatically judges the type of each original. Coloured origi-
nals are copied in full colour and black-and-white originals are copied in black.
1
Press the [FULL COLOUR], [BLACK] or [AUTO COLOUR] button.
When you use “AUTO COLOUR”, note the following points:
When the coloured area in an original is extremely small, when the colours of the original
are close to black, or when the colours of an original are too light, these originals may be
automatically copied in black even though they are coloured. Also yellowed originals or
originals with a coloured background may be automatically copied in full colour even
though they are black-and-white. Select the full colour mode or the black mode depend-
ing on the state of the original to reproduce exact colours.
To Next Page
Loading...
Need help?
General
