28 Forgery Prevention Function/Storage of Colour Copies
Forgery Prevention Function/Storage of Colour Copies
Forgery prevention function
This copier has a forgery prevention function. Please ensure that your digital full-colour copier is
not used for making copies of prohibited items.
Storage of colour copies
y The copies should be kept in a place which is not exposed to light to prevent fading when
they are stored for a long time.
y If copies are kept pressed between plastics made of chloroethylene for a long time, the toner
may melt and stick to the plastic due to high pressure and high temperature. Keep them in
polyethylene binders.
y When a colour copy is folded, the toner at the fold can become separated.
y The toner on the copies may melt if it touches solvent. If the ink on the copies has not com-
pletely dried, the toner may also melt. Keep copies away from solvent.
y When copies are kept near an extremely high temperature such as a heater, the toner may
melt. Keep them at room temperature and do not allow this to vary very much.
To Next Page
Loading...
