3 SETTING OF BASIC COPY MODES
140 Copy Density Adjustment
Copy Density Adjustment
There are 2 types of copy density adjustment: the automatic copy density mode and the manual
copy density mode. In the automatic copy density mode, the equipment automatically selects
the most appropriate copy density by detecting the density of the original. In the manual copy
density mode, you can adjust the copy density manually according to the conditions of the origi-
nal.
Default setting: Manual density mode for “FULL COLOUR” / “AUTO COLOUR”, Automatic den-
sity mode for “BLACK”
Automatic copy density mode
1
Place paper in the drawer(s).
2
Place the original(s).
3
Full colour / Auto colour: Press the [AUTO] button.
Black: Confirm that the [AUTO] button is selected. If it is not, press
the button.
Set other copy modes as required.
4
Press the [START] button.
To Next Page
Loading...
