Toshiba E-STUDIO 2500C - Ready (Hole Punch Dust bin Is Full); Hole Punch Unit (Optional: MJ-6101, MJ-6004)

“READY (HOLE PUNCH DUST BIN IS FULL)” 377
“READY (HOLE PUNCH DUST BIN IS FULL)”
This message appears when the hole punch dustbin in the Hole Punch Unit (optional) becomes
full.
To dispose of the paper bits, follow the procedure below.
Hole Punch Unit (optional: MJ-6101, MJ-6004)
3
Dispose of the punched paper bits.
4
Attach the hole punch dustbin.
5
Close the cover of the Hole Punch Unit.
1
Open the cover of the Hole
Punch Unit.
2
Pull out the hole punch dust-
bin.