12 SPECIFICATIONS & OPTIONS
398 e-STUDIO2500c/3500c/3510c Specifications
e-STUDIO2500c/3500c/3510c Specifications
Model name FC-2500C/FC-3500C/FC-3510C
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fixing method Belt fusing
Photosensor type OPC
Original scanning system Flat surface scanning system
(When the Reversing Automatic Document Feeder is installed:
Fixed scanning system by feeding the original)
Original scanning sensor Linear CCD sensor
Scanning light source Xenon lamp
Resolution Scanning 600 dpi x 600 dpi
Writing Black-and-white: 2400 dpi x 600 dpi (Smoothing process),1 bit
Colour, Image smoothing: 600 dpi x 600 dpi, 8 bits
Acceptable originals Sheets, books and 3-dimensional objects
Acceptable original size Max. A3
Acceptable copy
paper size
Drawer A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-
R, COMP, 13" LG, 8.5" SQ, 8K, 16K, 16K-R
Bypass Paper size within 100 - 305 mm (Length), 148 - 457 mm (Width)
Acceptable copy
paper weight
Drawer
64 - 163 g/m
2
Bypass
64 - 256 g/m
2
Warm-up time Approx. 99 seconds
First copy time (A4 portrait) Black-and-white
e-STUDIO2500c/3500c: Approx. 6.5 seconds
e-STUDIO3510c: Approx. 5.2 seconds
Colour
Approx. 8.5 seconds
Continuous copy speed See P.400 “Continuous copying speed”.
Multiple copying Up to 999 copies (digital key entry)
Excluded image width Black-and-
white
Leading edge: 3.0±2.0 mm, Trailing edge: 3.0±2.0 mm,
Both edge: 2.0±2.0 mm
Colour Leading edge: 5.0+2.0/-1.0 mm, Trailing edge: 3.0±2.0 mm,
Both edge: 2.0±2.0 mm
Printer
(Black-and-
white/Colour)
Leading edge: 5.0+2.0/-1.0 mm, Trailing edge: 5.0±2.0 mm,
Both edge: 5.0±2.0 mm
Reproduction ratio Actual size 100±0.5%
Zoom 25 - 400% (in 1% increments)
For the Reversing Automatic Document Feeder 25 - 200%
(in 1% increments)
Paper supply Drawer
Approx. 550 sheets (80 g/m
2
), Approx. 500 sheets (105 g/m
2
)
Bypass
Approx. 100 sheets (80 g/m
2
), Approx. 80 sheets (105 g/m
2
)
Receiving tray loading capacity
Approx. 550 sheets (90 g/m
2
)
Toner density adjustment Magnetic auto-toner system
Exposure control Automatic plus manual selection from 11 exposure step
USB interface USB (Full speed)
Environment (for normal use) Temperature: 10 º - 30 ºC, Humidity: 20 - 85% (No Condensation)
Power requirements AC 220 - 240 V±10%, 8 A (50/60 Hz)
Power consumption 1.7 kW or less (including optional equipments)
To Next Page
Loading...
