3 SETTING OF BASIC COPY MODES
130 Duplex Copying
1-sided original -> 1-sided copy (default setting at installation)
1
Place paper in the drawer(s).
2
Place the original(s).
3
Confirm that the simplex/duplex button on the basic menu is [1 -> 1
SIMPLEX].
If [1 -> 1 SIMPLEX] is not shown, press the simplex/duplex button to display the next
menu, and then press the [1 -> 1 SIMPLEX] button on that menu.
Set other copy modes as required.
4
Press the [START] button.
To Next Page
Loading...
