2 HOW TO MAKE COPIES
94 Bypass Copying
Registering non-standard size in the memory
1
Follow steps 1 to 3 on “Bypass copying on non-standard size
paper” ( P. 9 1 ) .
2
Press the memory number button (from [MEMORY 1] to [MEMORY
4]) you want to register the dimension.
3
Key in each dimension, and press the [MEMORY] button on the
touch panel.
y Key in its length in [Length] and press the [SET] button on the touch panel. Set its
width in the same manner.
y Paper size that can be set is as follows:
Length: 100 mm to 297 mm
Width: 148 mm to 432 mm
To Next Page
Loading...
