2 HOW TO MAKE COPIES
84 Making Copies
Interrupt copying in progress and make other copies (Interrupt
copying)
While continuous copying is in progress, you can interrupt this job with another copy job. The fol-
lowing features cannot be used together with interrupt copying:
y Cover sheet copying
y Sheet insertion copying
y Store to e-Filing / Copy & File
y Job build
y [e-FILING]/[SCAN]/[FAX] buttons
When the [INTERRUPT] button is pressed while originals are being scanned, the
[INTERRUPT] button blinks first. Then the button lights after “Job interrupted job 1 saved”
appears when the scanning is finished.
2
Replace the original with a new one.
Set other copy modes as required.
3
Press the [START] button on the control panel.
4
After you have finished the interrupt copying, press the [INTER-
RUPT] button again.
The message “READY to resume job 1” appears and the interrupted job resumes.
Interrupt copying is automatically cancelled after a certain period by automatic function
clearing without the need to press the [INTERRUPT] button again. The interrupted job (=
Job 1) resumes after this automatic function clearing.
1
Press the [INTERRUPT] but-
ton on the control panel.
The [INTERRUPT] button blinks first,
then lights after “Job interrupted job 1
saved” appears.
To Next Page
Loading...
