3 SETTING OF BASIC COPY MODES
120 Selecting Finishing Modes
Staple sort mode
When the Finisher (optional) is installed, automatic stapling is enabled. You can select the sta-
pling position from three types.
y Special paper such as OHP films or sticker label cannot be used for stapling.
y Copies in different size cannot be stapled. (When the lengths of the copies are the same,
they can be stapled even if their sizes are different.)
(Example of selecting the [FRONT STAPLE SORT] button)
1
Place paper in the drawer(s).
When using this mode in bypass copying, specify the paper size in advance.
( P.85 “Bypass Copying”)
2
Place the original(s).
3
Press the finisher button on the basic menu.
To Next Page
Loading...
