3 SETTING OF BASIC COPY MODES
124 Selecting Finishing Modes
5
Press the [MAGAZINE SORT] (or [MAGAZINE SORT & SADDLE
STITCH] or [SADDLE STITCH]) button.
y The [MAGAZINE SORT & SADDLE STITCH] button and the [SADDLE STITCH] but-
ton are selectable only when the Saddle Stitch Finisher is installed.
y Set other copy modes as required.
6
Press the [START] button.
When placing the originals on the original glass, follow the procedure in P.70 “Placing
originals on the glass”.
Available conditions for saddle stitching
Available paper sizes are A3, A4-R and B4.
*1 When the cover is added, the tray loading capacity is always 5 sets.
y One cover of 64 g/m
2
to 256 g/m
2
can be added. In this case, this cover is included in the
maximum number of sheets that can have saddle stitching.
y When paper of a different weight is loaded, count the number of sheets for saddle stitching
as applied to the paper with the highest weight.
Paper weight
Saddle stitch tray loading capacity
11 - 15 sheets 6 - 10 sheets 5 sheets or less
64 g/m
2
10 sets 20 sets 25 sets
80 g/m
2
10 sets 20 sets 25 sets
90 g/m
2
*1
- 15 sets 25 sets
105 g/m
2
*1
- 15 sets 25 sets
To Next Page
Loading...
