Toshiba E-STUDIO 2500C - Page 215

Creating User Boxes 213
3
Press the [BOX NAME] button, and then enter the box name.
When the [BOX NAME] button is pressed, the letter entry menu ( P.44) is displayed.
Up to 32 letters can be entered.
To set the password, proceed to step 4. If not, skip to step 6.
4
Key in the password in “Password” as required, and then press the
[SET] button.
y Be sure to key in the 5-digit password.
y * (asterisk) is displayed in “Password” when the password is entered.
y To correct the entered password, press the [CLEAR] button on the control panel.
y When the [SET] button is pressed, “Retype Password” becomes highlighted.
5
Key in the password in “Retype Password”.
y * (asterisk) is displayed in “Retype Password” when the password is entered.
y To correct the entered password, press the [CLEAR] button on the control panel.