8JOB STATUS
314 Error Code
RFC related
4300 Job execution error
due to functional
restrictions
USB direct printing cannot be performed due to a functional
restriction. Contact your service technician.
4301 File conversion error The format of this file is not supported in the USB direct printing,
or the file is invalid. Check the file.
A221 Print job cancel Print job is cancelled. Retry the print.
A222 Print Job power inter-
ruption
Power failure occurred. Retry the print.
A290 Limit over error
(Black and White)
Number of prints has exceeded the one specified with the
department code and user code at the same time. Clear the limit
counter.
A291 Limit over error
(Black and White)
Number of prints has exceeded the one specified with the user
code. Clear the limit counter.
A292 Limit over error
(Black and White)
Number of prints has exceeded the one specified with the
department code. Clear the limit counter.
A2A0 Limit over error
(Colour)
Number of prints has exceeded the one specified with the
department code and user code at the same time. Clear the limit
counter.
A2A1 Limit over error
(Colour)
Number of prints has exceeded the one specified with the user
code. Clear the limit counter.
A2A2 Limit over error
(Colour)
Number of prints has exceeded the one specified with the
department code. Clear the limit counter.
Error code Problem What to do
2500 Syntax error, com-
mand unrecognized:
HOST NAME error
(RFC: 500), Destina-
tion mail address error
(RFC: 500), Terminal
mail address error
(RFC: 500)
Check if the Terminal mail address and Destination mail address
are correct.
Check if the mail server is operating properly.
Turn the power OFF and then back ON, and perform the job in
error again.
2501 Syntax error in param-
eters or arguments:
HOST NAME error
(RFC: 501), Destina-
tion mail address error
(RFC: 501), Terminal
mail address error
(RFC: 501)
Check if the Terminal mail address and Destination mail address
are correct.
Check if the mail server is operating properly.
Turn the power OFF and then back ON, and perform the job in
error again.
2503 Destination mail
address error
(RFC: 503)
Check if the mail server is operating properly.
Turn the power OFF and then back ON, and perform the job in
error again.
If the error still occurs, contact your service representative.
2504 HOST NAME error
(RFC: 504)
Check if the mail server is operating properly.
Turn the power OFF and then back ON, and perform the job in
error again.
If the error still occurs, contact your service representative.
2550 Destination mail
address error
(RFC: 550)
Check if the Destination mail address is correct. Check the sta-
tus of mailbox access restriction, etc. on the mail server.
Error code Problem What to do
To Next Page
Loading...
