Description of Each Component 31
6. Paper feed cover (optional)
Open this cover when releasing a paper misfeed in the Paper Feed Pedestal (optional) or
Large Capacity Feeder (optional).
P.333 “Misfeed in the Large Capacity Feeder (optional)”
P.334 “Misfeed in the Paper Feed Pedestal (optional)”
7. Paper size indicator
8. Paper Feed Pedestal (optional, KD-1018) and Additional Drawer Module (optional,
MY-1031) or Large Capacity Feeder (optional, KD-1019)
9. Drawers
Maximum 550 sheets (80 g/m
2
), 500 sheets (105 g/m
2
) of plain paper can be placed in one
go.
10. Front cover
Open this cover when you replace the toner cartridge and clean the charger.
P.320 “Replace Toner Cartridge Symbol”
P.327 “Replace Toner Bag Symbol”
P.358 ““Time for Slit glass and Main charger cleaning””
11. Power switch
Turn the power of the equipment ON or OFF with this.
P.45 “Turning power on”
12. Connector for USB storage device
Use this connector when printing files stored in a USB device or retrieving scanned data into
the USB device.
P.290 “USB print”
See the Scan Guide for details.
13. Network interface connector
Use this connector when connecting this equipment with network.
14. USB terminal (4-pin)
With this terminal, the equipment can be connected to your PC using a commercially avail-
able USB cable.
To Next Page
Loading...
