Toshiba E-STUDIO 2500C - Chapter 10: WHEN THIS MESSAGE APPEARS; “Toner near Empty”

10.WHEN THIS MESSAGE APPEARS
This chapter explains the various messages displayed on the touch panel and the appropriate actions to be
taken.
“Toner near Empty” ..............................................................................................355
“Time for Slit glass and Main charger cleaning” ...............................................358
Cleaning the slit glass .....................................................................................................................358
Cleaning the chargers.....................................................................................................................361
“Check staple cartridge”......................................................................................362
Finisher (optional: MJ-1101)............................................................................................................362
Finisher (optional: MJ-1030) ...........................................................................................................364
“Check staple cartridge in the Saddle Stitch Unit”............................................366
“Examine stapler”.................................................................................................368
Finisher (optional: MJ-1101)............................................................................................................368
Finisher (optional: MJ-1030) ...........................................................................................................370
“READY (CHECK STAPLER)” ..............................................................................372
“Examine stapler in the Saddle Stitch Unit”.......................................................373
“READY (CHECK SADDLE STITCH STAPLER)” ................................................376
“READY (HOLE PUNCH DUST BIN IS FULL)” ....................................................377
Hole Punch Unit (optional: MJ-6101, MJ-6004) ..............................................................................377
“POWER FAILURE” ..............................................................................................378
“Time for periodic maintenance” ........................................................................379
“Check paper size setting on control panel for drawer N” ...............................380
During copying (using a drawer) .....................................................................................................380
During copying (using the bypass tray)...........................................................................................383
During printing from the FAX or Printer (using a drawer) ................................................................384
During printing from the Printer (using the bypass tray)..................................................................386
“Cannot print this paper size Select the other drawer” ....................................388