10 WHEN THIS MESSAGE APPEARS
382 “Check paper size setting on control panel for drawer N”
7
Press the drawer button corresponding to the one mentioned in the
message on the touch panel.
8
Press the paper size button corresponding to the one placed in the
drawer.
P.54 “Preparation 2- Setting Copy Paper”
9
Place the paper removed in step 3 in the drawer.
10
Press the [USER FUNCTIONS] button to return to the basic menu.
Set the original and start the copying again.
When “POWER FAILURE” appears, press the [FUNCTION CLEAR] button twice to clear
the message. See P.378 ““POWER FAILURE”” for details.
To Next Page
Loading...
