Preparation 1- Turning Power On/Off 49
5
Enter the password (maximum 64 letters) and then press the
[ENTER] button.
6
Press the [ENTER] button.
The menu will switch and the equipment will be ready to be used.
If the user information is incorrectly entered, the menu will not switch. In this case, press
the [FUNCTION CLEAR] button and then enter it again.
Displaying the available number of copies
The amount is determined by how many copies the user ( ) or the department ( ) has
remaining and the smaller of the two numbers is displayed.
The number appears for 5 seconds on the upper right of the screen.
COLOUR: Available number of copies for colour copying
BLACK: Available number of copies for black-and-white copying
The display differs depending on the management setting of this equipment.
When copying is finished
When you finish all operations, press the [ACCESS] button to prevent unauthorized use
of the equipment. The display returns to the one for entering user information.
To Next Page
Loading...
