Toshiba e-STUDIO203 Service Handbook

e-STUDIO163/203 ERROR CODE AND SELF-DIAGNOSTIC MODE December 2005 © TOSHIBA TEC
2 - 14
Confirming and changing of the access code counter value
Notes:
• A counter value is separated as follows: 1 000 280 070, and is displayed from the high-order
position. Press the reproduction ratio button ([200%] or [25%]) to shift the counter value dis-
play to the 3 digits of the next lower/higher order.
• Change of the counter value can be registered only after the [START] button is pressed. If the
[CLEAR] button is pressed before the registration is completed, the changed value is also
canceled.
• Only the total counter value for each access code can be confirmed.
<Operation procedure>
Follow the procedure bellow to key in an access code when the access code mode is set.
[200%]
[25%]
Confirm
Displaying
3 digits
[200%]
Displays
higher digits
[25%]
Displays
lower digits
Correct
[8][START]
[POWER]
Auto search
[INTERRUPT]
Access code
Access code
[Digital keys]
Confirm
[Digital keys]
Displaying
3 digits
[200%]
Displays
higher digits
[25%]
Displays
lower digits
Correct
[Digital keys]
Displaying
3 digits
Correct
[Digital keys]
Stores
value in RAM
[START]
[POWER]
OFF/ON
[POWER]
Key in access code
[Digital keys]
[START]
[CLEAR]
Cancel
Normal
operation
"Displays the access
code mode"
When an access code
which has already been
registered is entered
"Displays number of copies"
When an access code
which has not been
registered previously
is entered
*: Apply the same procedure when the equipment enters the interruption mode.
06/04

Toshiba e-STUDIO203 Specifications

General

Brand	Toshiba
Model	e-STUDIO203
Category	All in One Printer
Language	English