e-STUDIO163/203 ERROR CODE AND SELF-DIAGNOSTIC MODE December 2005 © TOSHIBA TEC
2 - 16
2.2.7 Adjustment mode (05)
Classification List of Adjustment Mode (05)
Items in the adjustment mode list in the following pages can be corrected or changed in the adjust-
ment mode (05). Turn ON the power with pressing the digital keys [0] and [5] simultaneously in
order to enter this mode.
Classification Adjustment Mode (05)
ADF
[Aligning amount] 354
[Transporting] 357,358,365
Image
[Printer density] 667-0 to 4,672-0 to 4
[Image density] 501,503,504,505,506,507,508,509,510,512,514,515,532,533,534,845,
846,847,850,851,852,855,856,857,860,861,862
[Gamma table] 609
[Gamma slope] 593,594,595
[Background adjust-
ment]
600,601,602,869,870,871
[Sharpness] 620,621,622,623,865-0 to 2,866-0 to 2,867-0 to 2
[Smudged/Faint text] 648,654,655,664,665
[Margin] 430,431,432,433,435,436,437,438
[Range correction] 535,536,537,570,571,572,693,694,695,820,821,822,825,826,827,830,
831,832,835,836,837
Paper feeding
[Paper pushing
amount]
466-0 to 7
[Aligning amount] 450-0 to 2,451-0 to 2,458-0 to 2,460-0 to 2,461-0 to 2,462-0 to 3,
463-0 to 2,464-0 to 2
Drive
[Exit motor] 424
[Main motor] 421
Development
[Auto-toner] 200,201
[Developer bias] 205
[Temperature] 270
[Relative humidity] 247
[Drum temperature] 248
Scanner
[LED] 311,312,313
[Position] 305,306
[Carriage position] 359
[Shading position] 350,351
[Reproduction ratio] 340
[Peak] 310
Charger [Main charger bias] 210
Transfer [Transfer bias] 220,221,222
Separation [Separation bias] 233,234,235
Process [Toner recycle] 280
Laser
[Write starting] 410,411,440,441,442
[Polygonal motor] 401,405
[Laser power] 286
[Sideways deviation] 497-0 to 5
06/07
To Next Page
Loading...
Need help?
General
