Toshiba e-STUDIO203 - Page 79

December 2005 © TOSHIBA TEC e-STUDIO163/203 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 59
2
Pressure roller 1250-0, 1, 3, 4, 6, 7 <Default values of code 1250
(e-STUDIO 163/203)>
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Fuser roller separation finger 1268-0, 1, 3, 4, 6, 7 <Default values of code 1268
(e-STUDIO 163/203)>
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Feed roller
(Drawer)
1298-0, 1 <Default values of code 1298
(e-STUDIO 163/203)>
Sub-codes 0: 0/0
Sub-code 1: 80,000/80,000
Feed roller
(PFU)
1300-0, 1 <Default values of code 1300
(e-STUDIO 163/203)>
Sub-codes 0: 0/0
Sub-code 1: 80,000/80,000
Separation roller
(Bypass unit)
1316-0, 1 <Default values of code 1316
(e-STUDIO 163/203)>
Sub-codes 0: 0/0
Sub-code 1: 80,000/80,000
Feed roller
(Bypass unit)
1324-0, 1 <Default values of code 1324
(e-STUDIO 163/203>
Sub-codes 0: 0/0
Sub-code 1: 80,000/80,000
Pickup roller
(Bypass unit)
1332-0, 1 <Default values of code 1332
(e-STUDIO 163/203)>
Sub-codes 0: 0/0
Sub-code 1: 80,000/80,000
Recovery blade 1336-0, 1, 3, 4, 6, 7 <Default values of code 1336
(e-STUDIO 163/203)>
Sub-codes 0, 3, 6, 7: 0/0
Sub-code 1: 72,000/90,000
Sub-code 4: 180,000/180,000
Items
PM management setting <Procedure 4>
*Indicated in 8 digits
Remarks
06/05