3
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO205L/255/305/355/455
ADJUSTMENT
3 - 57
(4) Loosen 2 screws.
Fig. 3-47
(5) Move the entire guide to the front or rear
side. Be sure to move the entire guide until
you can see 4 triangles.
(6) Tighten the 2 screws of the adjustment plate.
(7) Install the drawer tray, drawer and stopper.
* Adjustable range: 3 mm to the front side,
4 mm to the rear side (Unit: 1 mm)
Fig. 3-48
Screw
(A)
(B)
Scale
To Next Page
Loading...
