107
5
5
Adjust the width of binding margin, and
then press the [ENTER] button.
- The default width of the margin is 7 mm.
- To adjust the width, press the [0mm] or [30mm] button to select
the desired number, and then press the [ENTER] button.
- In duplex copying, margins on the back are created on the other
side of those in the front.
"5.DUPLEX COPYING" Page 87
z Select other copy modes as required.
6
Press the [START] button.
Creating a Bookbinding Margin
When Book Margin is selected, use it in conjunction with the Duplex Copying mode from book-type originals
("5. Book-type Originals -> 2-Sided Copies" Page 91) or the Dual-Page mode (2-sided) ("4.DUAL-
PAGE" Page 111).
Acceptable paper sizes for this function are A4, B5 and LT only.
1
Press the [EDIT] button to enter the edit
menu, and then press the [IMAGE SHIFT]
button.
2
Press the [BOOK] button.
To Next Page
Loading...
