155
7
4. SCAN TO E-MAIL
In this function, the scanned data can be sent to the specified E-mail address as an attached file.
After finishing the setting for the E-mail transmission, the settings for SCAN TO E-FILING or SCAN TO FILE
can be made and the data can be scanned simultaneously.
* To use SCAN TO E-MAIL, the configuration of the equipment needs to be set by the network
administrator.
1
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
- If there is not enough space in the hard disc, the number of
originals that can be scanned may be restricted. According to the
network environment, available data amount may be restricted.
The reversing automatic document feeder (optional) enables
consecutive scanning of more than one original.
2
Press the [SCAN] button on the control
panel to enter the scan menu.
3
Press the [SCAN TO E-MAIL] button.
To Next Page
Loading...
