Toshiba e-STUDIO3511 - Setting Copy Paper; Acceptable Copy Paper Types and Sizes

36
2.HOW TO MAKE COPIES
2
1. SETTING COPY PAPER
Acceptable Copy Paper Types and Sizes
* “Maximum capacity” refers to the number of sheets when the paper recommended by Toshiba is set.
* LT format is the standard size for only use in North America.
* The values shown in the parenthesis are rounded off below a decimal point.
- Paper between 90-209 g/m
2
can be copied if the thick mode is used.
Feeder Paper Type Paper Size Maximum sheet capacity
Drawers
(The optional
drawers included)
Plain Paper
(64-80 g/m
2
)
(Standard Size)
A/B format: A3, A4, A4-R, A5-R,
B4, B5, B5-R,
FOLIO (210 x 330 mm)
LT format:
LD (11” x 17”), LG (8
1
/
2
” x 14”),
LT (11” x 8
1
/
2
”), LT-R (8
1
/
2
” x 11”),
ST-R (5
1
/
2
” x 8
1
/
2
”),
COMP (10
1
/
8
” x 14”),
13” LG (8
1
/
2
” x 13”),
8.5” SQ (8
1
/
2
” x 8
1
/
2
”),
600 sheets (64 g/m
2
)
550 sheets (80 g/m
2
)
450 sheets (81-105 g/m
2
)
* Height: approx. 60.5 mm
Thick 1
(81-105 g/m
2
)
Large capacity
feeder (Option)
Plain Paper
(64-80 g/m
2
)
(Standard Size)
A4 only
3,000 sheets (64 g/m
2
)
2,500 sheets (80 g/m
2
)
Thick 1
(81-105 g/m
2
)
2,000 sheets (81-105 g/m
2
)
* Height: approx. 137.5 mm
Bypass Guide Plain paper
(64-80 g/m
2
)
(Standard Size)
A/B format: A3, A4, A4-R,
A5-R, A6-R, B4, B5, B5-R,
FOLIO (210 x 330 mm)
LT format:
LD, LG, LT, LT-R,
ST-R, COMP, 13” LG, 8.5” SQ,
A3 wide (305 x 457 mm)
(Non-Standard size)
Length: 100-297 mm
Width: 148-432 mm
100 sheets (64-80 g/m
2
)
* Height: approx. 11 mm
Thick1
(81-105 g/m
2
)
80 sheets (81-105 g/m
2
)
* Height: approx. 11 mm
Thick2
(106-163 g/m
2
)
40 sheets (106-163 g/m
2
)
* Height: approx. 11 mm
Thick3
(164-209 g/m
2
)
30 sheets (164-209 g/m
2
)
* Height: approx. 11 mm
Sticker labels
* Height: approx. 11 mm
*1
*1.Sticker labels can be copied with fine image if Thick 2 mode is selected.
OHP
*2
*2.Automatic duplex copying is not available.
(Standard Size) A4 only 30 sheets
* Height: approx. 11 mm