139
6
2. SAVE AS FILE
In this SAVE AS FILE function, the copied original data can be sent and stored to the hard disc in the
equipment or the specified PC. You can administrate and edit the stored data in the e-Filing in the
equipment directly from the user's PC via network.
* The network administrator has to make settings for storing the original data to the PCs. For details, see
the [Network Administrator's Guide].
* The hard disc could be at fault. Be sure to backup the stored documents by downloading them with a
client PC using the File Downloader. See the [e-Filing Guide] for details.
1
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
- If there is not enough space in the hard disc, the number of
originals that can be stored may be restricted.
- Select the copy mode as required.
2
Press the [E-FILING/FILE] button on the
basic screen to enter the filing menu.
3
Press the [SAVE AS FILE] button.
4
Press the [FILE NAME] button to enter the
file name of the stored data.
- The letter entry menu is displayed.
A file name can contain up to 64 letters.
To Next Page
Loading...
