285
13
2. SIMPLE TROUBLESHOOTING
Check the following items and, if the problem still occurs, call your service representative for assistance.
NEVER attempt to repair, disassemble or modify the equipment by yourself. You could cause a fire or get
an electric shock.
ALWAYS contact your service representative for maintenance or repair of the internal parts of the
equipment.
Equipment does not Start
Display does not Change when Buttons or Icons are Pressed
Item to be checked Countermeasure Reference page
Is the power cord plug securely
inserted in the outlet?
Insert the power cord plug until
it comes to a stop.
-
Is the front cover firmly closed? Close the cover properly. "1.DESCRIPTION OF EACH
COMPONENT" Page 20
Item to be checked Countermeasure Reference page
Is the copier in the energy
saving mode (Automatic
Energy Saving mode)?
Press the [ENERGY SAVER] or
[START] button on the control
panel to clear the mode.(It takes
a while for the copier to become
ready.)
"Control Panel" Page 23,
"3.SWITCHING TO THE ENERGY-
SAVING MODE" Page 34
Is the power ‘OFF’ because
the weekly timer is functioned?
Press the [START] button to
return the power ‘ON’.
See the [User Function Guide].
Is the department code keyed
in?
Key in the correct department
code.
"Controlling the Use of the Copier with
Department Codes" Page 32
Is a key copy counter
(optional) used?
If you are using a key copy
counter, insert it into the slot.
"Controlling the Use of the Copier
Using the Optional Key Copy
Counter" Page 33
Is the “Warming up” message
displayed?
Wait until the copier becomes
ready.
"2.TURNING ON THE POWER
SWITCH" Page 30
To Next Page
Loading...
Need help?
General
