Toshiba e-STUDIO3511 - Selecting Finishing Modes; Finishing Modes and Finishers (Optional)

76
3.SETTING OF BASIC COPY MODES
3
4. SELECTING FINISHING MODES
Finishing Modes and Finishers (Optional)
The functions available differ depending on whether a finisher is installed and which type of finisher (MJ-
1022, MJ-1023 and MJ-1024) it is.
* The touch panel used in this chapter appears when the optional saddle-stitch finisher (MJ-1024) with hole
punch unit (MJ-6004) is installed in your copier.
Type of Finishing Mode
- MJ-1024: Saddle-stitch finisher
- MJ-1023: Multi-staple finisher
- MJ-1022: Single-staple finisher
- MJ-6004: Hole punch unit
Confirm the finishing mode type of your equipment with the following table.
Y: Available
N: Not available
Finishing Type of finishing mode
Sort/
Group
Rotate
sort
Staple
sort
Magazine
sort
Magazine sort
+ Saddle stitch
Saddle
stitch
Hole
punch
MJ-1024 + MJ-6004 Y Y Y Y Y Y Y
MJ-1024 Y Y Y Y Y Y N
MJ-1023 + MJ-6004 Y Y Y Y N N Y
MJ-1023 Y Y Y Y N N N
MJ-1022 Y Y Y Y N N N
No finisher Y Y N Y N N N