Toshiba e-STUDIO3511 - Bypass Copying on Non-Standard-Size Paper

62
2.HOW TO MAKE COPIES
7.BYPASS COPYING (Cont.)
2
Bypass Copying on Non-Standard-Size Paper
Non-standard paper falls within the following ranges:
A (Length): 100-297 mm, B (Width): 148-432 mm
1
Follow steps 1 to 2 on "Bypass Copying"
 Page 59.
2
Press the [NON STANDARD] button.
3
Key in each dimension (length and width),
or recall the data stored in MEMORY, and
then press the [ENTER] button.
- When using the digital keys to key in the size:
Key in the length and press the [SET] button. Similarly, set the
value for the width.
A
B