Toshiba e-STUDIO3511 - Specifying both Original Size and Copy Size

73
3
3
Press the [AMS] button.
- "Setting the [OTHER SIZE] button"  Page 69
4
Place the original(s).
- "2.SETTING ORIGINALS"  Page 45
- The built-in sensors automatically detect the size of the original(s)
and compute the reproduction ratio with the specified paper size
respectively.
- If “Change direction of original” appear, proceed as directed:
z Select other copy modes as required.
5
Press the [START] button.
Specifying Both Original Size and Copy Size
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER"  Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS"  Page 45
3
Press the desired drawer (or ,
button), and then the [ZOOM] button.
- The copy paper size is selectable on the menu in step 4 as well.