55
2
4. AUTO JOB START (JOB PRESET)
While warming up or multi-copying, you can reserve the copy.
Setting Auto Job Start
1
Place the original(s).
2
Select the copy mode.
Be sure that the job starts in the previous copy mode if you do not
select the copy mode.
3
Press the [START] button.
- Up to 6 jobs can be stored in the memory. Place the originals of
the 6th job on the original glass or the reversing automatic
document feeder (optional) and press the [START] button. Then
“Auto Start” appears:
- Up to 1,000 sheets of A4 size can be stored per 1 job, or until the
memory becomes full.
When exceeding the above limit (1,000 sheets of A4 size or full
memory) during the scanning, the following menu is displayed.
Press the [YES] button to print the scanned data and press the [NO]
button to delete it.
To Next Page
Loading...
