258
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
5.CLEAR PAPER SYMBOL (Cont.)
12
4. Paper Misfeed on the Bypass Feed Unit
1
Pull out misfed paper on the bypass tray.
5. Paper Misfeed in the Automatic Duplexer
1
Make sure that the bypass tray is opened,
and then open the automatic duplexer.
- Be careful not to let your fingers be caught between the
equipment and the automatic duplexer.
This could injure you.
- Do not touch the metal portion of a guide board as it could burn
you.
2
Lift the paper guide as indicated by the
arrow and remove any misfed paper.
3
Lower the paper guide and return the
automatic duplexer to the original
position.
- Be sure to close both sides of the Automatic Duplexer firmly.
To Next Page
Loading...
