149
7
7
Press the [DOCUMENT NAME] button to
enter the name of the scanned data.
- The letter entry menu (see "3.ENTERING LETTERS" Page
141) is displayed. A document name can contain up to 64 letters.
- Press the [ENTER] button on the letter entry menu.
8
Press the [EDIT] button to set the original
type and size, and the scanning
conditions.
- Press the [Next] or the [Prev] button to switch the screen and
make necessary settings. After having completed all the settings,
press the [ENTER] button.
9
Press the [ENTER] button.
To Next Page
Loading...
