EPA ENERGY STAR ® (MFD)
The United States Environmental Protection Agency (EPA) has introduced a voluntary programme, the
ENERGY STAR programme, to encourage the widespread and voluntary use of energy-efficient
technologies that enhance the workplace, improve product performance and prevent pollution. As an
ENERGY STAR Partner, the TOSHIBA TEC CORPORATION has determined that this copier model meets
the
ENERGY STAR guidelines for energy efficiency.
For Copier/Printer + Fax models, ENERGY STAR guidelines require ENERGY STAR multifunction copiers
to have a ‘Sleep Mode’ feature that automatically makes the copier enter the sleep mode after a period of
inactivity. The copier must also automatically change to a ‘Low Power Mode’ (Automatic Energy Save) after
a period of time since the last usage.
e-STUDIO3511/4511 Copier/Printer + Fax model (multifunction model)
‘Sleep Mode’
The copier consumes less than 80 watts (e-STUDIO3511)/90 watts (e-STUDIO4511) in the ‘Sleep
Mode’.
‘Sleep Mode’ Default Time-
The default time while in ‘Sleep Mode’ is 60 minutes (e-STUDIO3511)/60 minutes
(e-STUDIO4511).
‘Automatic Energy Save’-
The copier consumes less than 184.75 watts (e-STUDIO3511)/223.25 watts (e-STUDIO4511) while
in ‘Energy Save Mode’.
‘Automatic Energy Save’ Default Time-
The default time before switching to ‘Automatic Energy Save Mode’ is 15 minutes.
Note 1- The default setting for ‘Sleep Mode’ and ‘Automatic Energy save’ can be changed.
Note 2- In the sleep mode, if printer data is received, or the start button on the control panel is pressed,
the copier starts warming itself up and prints out the data when it becomes ready.
In accordance with EPA
ENERGY STAR programme guidelines, Toshiba recommends the following
recycled paper.
Great White MultiUse 20 paper
Great White MultiUse 24 paper
If you have any questions regarding the use of recycled paper or some recommended types of recycled
paper, please contact your authorized Toshiba dealer.
ENERGY STAR is a U.S. registered mark.
To Next Page
Loading...
Need help?
General
