226
11.TEMPLATE
2.RECALLING TEMPLATE (Cont.)
11
6
Confirm that “Updated the template
setting” is displayed on the screen.
z Select other copy mode as required.
7
Press the [START] button.
When Recalling Template in the User Group
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 36
2
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
3
Press the [TEMPLATE] button on the
control panel.
- Menu for recalling template is displayed.
4
Select the group registered the template
you want to recall, and then press the
[ENTER] button.
- Switch to the applicable menu using the [Prev] or the [Next]
button.
- To display the applicable menu immediately, key in the number of
the desired user group.
5
Key in the Password (5 digits) of the
selected group, and then press the
[ENTER] button.
- If the password has not been set at the group registration, skip
this procedure and go to step 6.
To Next Page
Loading...
