232
11.TEMPLATE
3.REGISTERING TEMPLATE (Cont.)
11
8
Press the empty [TEMPLATE] button, and
then press the [SAVE] button.
9
Enter the data requested.
- Although either the “NAME 1” or the “NAME 2” must be entered,
the “USER NAME” and the “PASSWORD” are entered as
required.
- When pressing the [NAME 1] button, the menu of entering letters
("3.ENTERING LETTERS" Page 141) is displayed, so enter
the name with up to 11 letters.
- Enter the name with up to 11 letters for “NAME 2” and with up to
30 letters for “USER NAME” as the above manner.
10
When pressing the [PASSWORD] button
on the menu of step 9, the menu is
switched as shown on the right. Key in a
5-digit identical number in both
“Password” and “Retype Password”, and
then press the [ENTER] button.
- Press the [ENTER] button after entering the password.
11
Press the [SAVE] button.
- The menu returns to step 1, which is the menu seen before
pressing the [TEMPLATE] button on the control panel.
To Next Page
Loading...
