Toshiba e-STUDIO3511 - Page 238

236
11.TEMPLATE
4.CHANGING INPUT DATA (Cont.)
11
4
Key in the “Password” (5 digits) for
selected group, and then press the
[ENTER] button.
- If the password has not been set at the group registration, skip to
step 5.
5
Press the [NAME] button and/or the
[USER NAME] button.
- When pressing the NAME button, the menu of entering letters
("3.ENTERING LETTERS"  Page 141) is displayed, so enter
the name with up to 20 letters.
- Enter the name with up to 30 letters for the “USER NAME” as the
above manner.
- To change the password only, skip step 5.
6
When pressing the [PASSWORD] button
on the menu of step 5, the menu is
switched as shown on the right. Key in the
changed number (5-digit identical
number) in both “Password” and “Retype
Password”, then press the [ENTER]
button.
- Not to change the password, skip step 5.
7
Press the [ENTER] button.
- The data of user group are changed.