260
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
5.CLEAR PAPER SYMBOL (Cont.)
12
2
Open the fuser unit cover.
3
Holding the knob (A), open the transport
guide.
4
Remove any misfed paper inside the fuser
unit.
5
Close the transport guide and the fuser
unit cover. Push up the fuser pressure
release lever to return the jam releasing
unit cover, the automatic duplexer and the
bypass tray to the original positions.
6
Pull the lever toward you to loose the
misfed paper. Hook a finger under the
loosen part of it, and then pull it out.
(
A
)
(
1
)
(
2
)
To Next Page
Loading...
