Toshiba e-STUDIO3511 - Page 300

298
14.SPECIFICATIONS & OPTIONS
2.SPECIFICATIONS OF OPTIONS (Cont.)
14
Tray Loading Capacity
Unit: mm (with ±7 mm allowance)
Values in parentheses is the number of 80 g/m
2
sheets.
Single-Staple Finisher (MJ-1022)
Model Name MJ-1022
Type Hanging-type
Acceptable Paper Size A3, A4, A4-R, B4, B5, B5-R, A5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP
Acceptable Paper Weight
50-209 g/m
2
Number of Copies Stapled at
a time
Acceptable weight for staple:
64-80 g/m
2
A4, A4-R, B5, LT, LT-R 30 sheets
B4, LG 20 sheets
A3, FOLIO, LD, COMP 15 sheets
Stapling Position Rear
Power Source Supplied from the copier
Dimensions 451 mm (W) x 539 mm (D) x 590 mm (H)
Weight Approx. 17 kg
Power Consumption 40 W max.
(MJ-1022 with mixed paper not loaded)
Mode Non-Sort Sort/Group Staples loaded
Tray No. 1 2 1 2 1 2
ST-R, A5-R,
B5-R
30
(200)
99
(700)
-- - -
LT, LT-R,
A4, A4-R, B5
30
(200)
99
(700)
30
(200)
99
(700)
170 sheets or 30 sets
*1
*1.The value reached earlier by using condition
600 sheets or 50 sets
*1
B4, LG 20
(140)
70
(490)
20
(140)
70
(490)
110 sheets or 30 sets
*1
400 sheets or 50 sets
*1
A3, FOLIO, LD,
COMP
15
(100)
49
(350)
15
(100)
49
(350)
80 sheets or 30 sets
*1
300 sheets or 50 sets
*1