60
2.HOW TO MAKE COPIES
7.BYPASS COPYING (Cont.)
2
- Draw the triple paper holder depending on the paper size.
- Raise (B) before placing A3/LD size or larger.
2
Place the original(s).
3
Press the button that represents the size
of the paper that has been set for A3, A4,
B4 and B5.
When the paper size is not specified, the copying speed may be
lower due to the cleaning operation inside the copier.
4
When the standard size paper other than
A3, A4, B4 and B5 is set, press the
[OTHER SIZE] button.
- See "Setting the [OTHER SIZE] button" Page 69.
5
Press the paper size key corresponding to
the paper that has been set.
(
B
)
To Next Page
Loading...
