GX9 ASD Installation and Operation Manual 245
GX9 ASD Optional Devices
The GX9 ASD may be equipped with several options which are used to expand the functionality of the
ASD. Table 18 lists the available options and their functions.
Table 18. GX9 ASD Optional devices and functions.
Item Device Function
ASD-CAB-USB RJ-45-to-USB (ASD to PC cable).
ASD-EOI-N4-G9
EOI Remote Mounting Kit for NEMA 4 applications. See the section titled EOI Remote Mounting
on pg. 36 for further information on mounting the EOI remotely.
ASD-ISO-1
Provides isolation of the Control Board output circuit from the AM/FM output and from the II
input.
ASD-MTG-KIT9
EOI Remote Mounting Kit. See the section titled EOI Remote Mounting on pg. 36 for further
information on this option.
ASD-SS This option board is used to provide a hardware-based speed search function.
ASD-TB1-AC1 Provides 120 VAC discrete input terminal activation and additional I/O terminals.
HS35 Encoder
Provides rotational speed and/or directional information. The Encoder is mounted on the motor
shaft or the shaft-driven equipment.
ASD – Multicom Option Board
Note: Multicom boards are identified as ASD-Multicom-A, -B, -F, etc.
-A
Incorporates the Modbus, Profibus, or Device Net communications protocol for system control
and is able to receive and process Vector Control feedback.
-B Provides a line driver and open collector interface for system control.
-F
The Tosline-F10 interface provides high-speed communication to Toshiba control equipment via
twisted pair wiring.
-J Able to receive and process vector control feedback via line driver or open collector interface.
-S
The Tosline-S20 interface provides high-speed communication to Toshiba control equipment via
fiber optics.
-X Provides extended terminal I/O functions for monitoring, feedback, and control.
Note: See the user manual of the applicable option for further information on each item.
To Next Page
Loading...
Need help?
General
