Toshiba GX9 - Program Mode Menu Navigation

44 GX9 ASD Installation and Operation Manual
Program Mode Menu Navigation
Table 5 lists the menu items of the Program mode and maps the flow of the menu selections. The
Parameter Numbers for the listed functions are provided where applicable. The functions listed may be
accessed (and changed) as mapped below or via the Direct Access method: Program  Direct Access 
applicable parameter number.
Table 5. Program Mode Mapping.
Program Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number
V IRTUAL L INEAR P UMP
(see Virtual Linear Pump Setup
on pg. 71 for more on this
function)
Virtual Linear Pump
Setup Wizard
Motor/ASD Setup
N/A
Transducer Setup
Virtual Linear Pump Max/Min Setup
Settings
Mode Switch F911
Application Type F912
Application Operating Mode F379
Transducer Units N/A
Transducer Output Range F914
Transducer Maximum Reading F916
Transducer Minimum Reading F915
Minimum (Threshold) F917
Maximum (Threshold) F918
Command Source F920
Command Value F921
Low Frequency Limit F919
Start and Stop Points
Start and Stop Mode F927
Start and Stop Delay Timer F928
Low Start and Stop Point F929
High Start and Stop Point F930
Input Terminal 5 (S1) Function F115
Sleep Timer
Sleep Timer F925
Sleep Timer Delay F926
Run External Devices
External Delay Timer F931
External Device Low Band F932
External Device High Band F933
Output Terminal 1 (OUT1) Function F130
Output Terminal 2 (OUT2) Function F131
Low Suction/No-Flow Cut
Off
Low Suction/No-Flow Cut Off Mode F934
Low Suction/No-Flow Cut Off Delay Timer F936
Input Terminal 5 (S1) Function F115
Low Suction/No-Flow Cut Off Disposition F935