Toshiba Satellite 4030CDT - Page 139

Exploring Your Options
Setting up Windows 98 to work with your printer
4 Select one of the following:
♦ If the printer you are setting up is not connected to a net
work, select Local printer.
♦ If the printer you are setting up is connected to a network,
select Network printer.
5 Click Next to continue.
♦ If your printer is a Plug and Play device, Windows 98 rec
ognizes and sets up the printer automatically. Skip to step
13.
♦ If your printer is not a Plug and Play device, the Add
Printer Wizard prompts you to identify the printer you want
to set up.
6 Select your printer from the list of manufacturers and printers.
If your printer is not listed and you have the printer driver on
diskette, insert the diskette into the diskette drive and click
Have Disk, then click Next to continue.
The Add Printer Wizard prompts you to specify the printer
port.
7 Select the port settings according to the port to which your
printer is connected and the instructions in your printer docu
mentation, then click Next.
The Add Printer Wizard asks you to enter a "friendly" printer
8 Enter a name for your printer.
HINT: If you are using more than one printer, make sure the
name is descriptive enough to help you tell the difference.
9 Select one of the following:
♦ If you are setting up the default printer, click Yes.
♦ To make the printer available only when specifically
requested, click No.
Part 1: Getting To Know Your Computer