Toshiba Satellite 4030CDT - Setting up Your Printer

Getting Started
Using the computer for the first time
Setting up your printer
To use the Add printer Wizard to set up your printer:
1 When the system prompts you to set up your printer, click
Next and follow the on-screen instructions.
If you plan to install a printer later, click Cancel.
2 Select your printer manufacturer and model from the Printers
dialog box and click Next.
If the driver for your printer is on diskette, insert the diskette
into the diskette drive, click Have Disk, then in the Install
From Disk dialog box, click OK.
3 Select the port to which you want to connect the printer. Typi
cally, a parallel printer is set to port LPT1 and a serial printer is
set to COM 1. (If you are not sure which type of printer you
have, check your printer manual.)
4 Enter the printer name.
5
If you want setup to print a test page, click Yes, then click
Finish.
Completing the initial start-up procedure
Setup displays the Welcome to Windows 98 screen. This screen
displays the following options:
♦ Register Now - Allows you to register your copy of
Windows 98 with Microsoft online.
♦ Connect to the Internet - Launches the Internet Connection
Wizard and connects you to the Internet.
♦ Discover Windows 98 - Provides a brief overview of Windows
98 essentials, new features, and a tutorial. For a more complete
introduction, see "Getting to Know Windows 98" on page 71.
♦ Maintain your Computer - Launches the Maintenance Wizard
in Windows 98.
When you are ready to start Windows 98, click the Close button
on the Welcome to Windows 98 screen.
Part I: Getting To Know Your Computer