Toshiba Satellite 4030CDT - Using the Accupoint Pointing Device

Getting Started
Using the computer for the first time
NOTE: To avoid data loss, do not turn off the computer if any
of the drives are being accessed. The hard disk drive and Dis-
kette/CD_ROM lights illuminate when the hard disk drive is
accessed.
If you are turning on the computer for the first time, do not
turn it off until the operating system has loaded completely.
Using the AccuPoint pointing device
The circular button in the middle of the keyboard is the AccuPoint
pointing device. Use the Accupoint pointing device to move the
cursor and to select items on the screen.
; AccuPoint pointing device
;
- Primary AccuPoint button
■ Secondary AccuPoint button
AccuPoint pointing device
HINT: If you would rather use a mouse or trackball, you can
connect one to the computer's serial or PS/2 port. For infor
mation, see "Connecting a mouse" on page 23.
To move the cursor, gently push the AccuPoint in the direction you
want the cursor to move. Pushing harder on the AccuPoint moves
the cursor faster.
When a step instructs you to click or choose an item, move the
cursor to the item, then press and release the primary AccuPoint
button. To double-click, press the primary AccuPoint button twice
in rapid succession. The primary AccuPoint button corresponds to
the primary (typically left) mouse button.
Part I: Getting To Know Your Computer