Toshiba Satellite 4030CDT - Resolving a Hardware Conflict

If Something Goes Wrong
Resolving a hardware conflict
Starting Windows with the Safe mode command
prompt only option
Selecting Safe mode command prompt only bypasses the system
start-up files and displays the command prompt.
Use this option under the following conditions:
♦ Windows 98 fails to start even in Safe mode.
♦ You want to run MS-DOS commands such as Edit to make
changes to your start-up files.
♦ You want to avoid loading HIMEM.SYS (extended memory
manager), or IFSHLP.SYS (file system manager).
Windows 98 can help you
If Windows 98 has started properly, but you still have a problem
using your computer, Windows 98 Help can assist you in trouble
shooting the problem.
To access Windows 98 Help:
1 Click the Start button and click Help.
2 Click the Contents tab and type Troubleshooting.
3 Double-click a problem you would like help with, and follow
the steps on the screen.
Resolving a hardware conflict
If you receive an error message telling you there is a device driver
conflict or a general hardware problem, try using Windows Help
to troubleshoot the problem first.
To access help on hardware conflicts:
1 From the Windows Help menu, click the Contents tab and
type Troubleshooting.
2 Click hardware conflict and follow the steps.
Part I: Getting To Know Your Computer