Toshiba Satellite 4030CDT - Saving Your Work

Learning the Basics
Saving your work
♦ If you know the program's location, type the command
line. For example, to access Paintbrush, type
C:\Windows\pbrush.exe.
then click OK.
If you don't know the program's location, click Browse... In
the Browse dialog box, enter the filename (for example
pbrush.exe) and select the drive to search. When Windows has
found the file, click Open.
The specified program opens. In this case, Windows opens
Paintbrush.
Saving your work
Before you turn off the computer, save your work to the hard disk
or a diskette. This is one of the most important rules of computing.
You can never save your files too often.
NOTE: Save your data even when you are using Resume
Mode or the Stand by command, in case the battery dis
charges before you return to work.
Many programs offer a feature that saves documents at regular
intervals, for instance, every 15 minutes. Refer to the documenta
tion that came with your program for details.
To save a file, do one of the following:
♦ If you are updating the file, open the File menu and click Save.
♦ if you are creating a new file, open the File menu and click
Save As. Type a name for the file, then click OK.
HINT: To make another copy of the file you are currently work
ing with, choose Save As from the File menu and give the new
file a different name.
Part I: Getting To Know Your Computer