Toshiba Satellite 4030CDT - Problems When You Turn on the Computer

If Something Goes Wrong
Problems when you turn on the computer
To close the program:
1 Press Ctrl, Alt and Del simultaneously.
The Close Program dialog box displays all the programs and
processes currently in operation. If the program has stopped
responding, the words "not responding" appear beside it.
2 Click End Task, then click Cancel.
You can disable CPU sleep mode in Hardware Setup or TSETUP.
Follow these steps to disable sleep mode in TSETUP:
1 Click Start, Shut Down, Restart Computer in MS-DOS
Mode, then click OK.
2 Enter the following command:
c:\dos\tsetup
3 Using the arrow keys, highlight Battery Save Mode, then
choose User Settings from the drop-down list.
This is the only way you can access the CPU Sleep Mode
function.
4 Set CPU Sleep Mode to Disabled.
5 Press End, then enter Y to save your changes and exit from
TSETUP.
6 Type Exit to return to Windows 98.
If the problem continues, contact the manufacturer of the program.
Problems when you turn on the computer
These problems may occur when you turn on the power.
The computer will not start
Make sure you attached the AC adapter and power cable properly
or installed a charged battery.
Press and hold the power button for a few seconds.
Part I: Getting To Know Your Computer